Latest forum posts
Photo of the day
37.JPG

For Sale

The ethos of LogunS16 .co.uk is to provide a centralised source of information, support and advice for the otherwise unsupported S16 range of air rifles. In addition to this, a number of our Forum members are able to offer products and services for sale directly through the site.

It should be pointed out that these sellers are Logun S16 'enthusiasts' and so although their sales make a profit, it is not operated as a business. The money generated goes into helping keep the community active, provides opportunity for development and testing and affords us all the opportunity to take advantage of bulk ordering of difficult to source parts. You will find some of the same items for sale on other parts of the internet (such as eBay) offered by the same sellers but will always be the same price or cheaper on this site...and sales through eBay help to fund eBay and not this site! You can ask any questions directly to the seller via the 'For Sale' section of the forum.

The following sales should be regarding as 'classifieds' and any purchasing contracts are between you the customer, and seller directly. LogunS16.co.uk merely provide the advertising medium and will not be held responsible.

If you wish to list a product or service for sale, you must first be a registered and active member of the forum and can apply via the For Sale section.


Have you thought about donating to the site to help keep us all going? A contribution from the above sales (the percentage that eBay would normally take) goes towards upkeep of the site but you may still feel you would like to contribute directly using the button at the top of the page; especially if you have made use of the forum for assistance. Thanks.

Full S16 O-ring seal service kit

All models and calibers of the S16 from the S16 mk.1 to the latest Edgar Brothers XVI full upgraded O-ring kits.

These O-rings have been selected specifically for the S-16 and have been rigorously tested and proven to outlast the standard seals as originally fitted to the rifle. I’ve been using these exact O rings for servicing the S-16 on over 200 rifles and found them to be much better than the standard O rings.

There are 2 main types of seals fitted in the S-16, static (none moving) and dynamic (moving) seals. The latter have been replaced with higher quality Viton O-rings which are far better suited to this application, work perfectly and last much longer.

S16 replacement O-ring kit

The kit includes:

  1. 4 x main body tube
  2. 2 x magazine PLUS 2 spare
  3. 2 x main probe
  4. 1 x probe end .22
  5. 1 x probe end .177
  6. 1 x barrel .177
  7. 1 x barrel .22
  8. 1 x valve block inner
  9. 1 x inner valve /probe
  10. 1 x 16s inner bottle
  11. 1 x 16s charge adapter
  12. 1 x mk1 bottle
  13. 1 x mk2 bottle
  14. 1 x between tube and lower receiver
  15. 2 x ‘brass’ between tube and lower receiver (latest type)
  16. 3 x bottle rings, inner gun, inner bottle plus a thicker one to be used when water has damaged the mating surfaces
  17. and O-ring lubricant!

This is basically every O-ring you will need! There is no valve stem O-ring included but in over 100 services completed with this kit, this O-ring has never needed replacement. However, the suppliers are trying to source the right size and quality just in case someone needs one at some point.

Discount available if more than 1 set is required
Please supply your gun’s serial number (omit the last number if you wish)

NOTE… guns must be chron’ed after O-ring replacement to check there still within the legal limit of 12 ftlbs. If a gun has been adjusted with leaking O-rings, fitting these (or standard) seals will take it above the limit.

Any questions please ask.
mick
(forum ref: logun-ator)

Rifle model
Rifle serial number

* Price is delivered to UK address only
overseas buyers please contact logun-ator

 


Service and repair manual

S16 O ring service

Dubbed by many as the “Haynes Manual for the S16 and the XVI”, this manual includes everything you need to know about both ranges of rifle including, history, model descriptions, disassembly, service and repair, modification, hints and tips and much more. Anything else that you need to know or anything that you want to clarify is where the Forum comes in as the author of the manual and many other very knowledgeable people are active members of the forum.

The manual covers the S16 mk1, mk2, S16s, EVO, S16XS FAC EXPORT and the EDGAR BROTHERS XVi. It is packed full of tips and handy hints from the oracle of the S16 – the “Logun-ator”!

57 pages, over 12,000 words, 12 schematic drawings and over 100 pictures.

S16 tuning / servicing guide will walk you through all aspects of service and repair and provides solutions to the most commonly encountered problems as well as some preventative maintenance tips.

PLEASE NOTE – If you are wanting a Logun S16 tuning guide simply to find out information about how to increase the power of your S16 then you are looking in the wrong place! As with all PCP air rifles, power can be adjusted internally however, this guide only describes how to fine tune the power to help you maximise output within the legal limit as many leave the factory at about 10.5 ft/lb and then loose power over time. Needless to say it is your responsibility to ensure your rifle remains within the legal limits in your country.

For much more information on the manual just have a look on our forum (of which the author is an active member) as both the manual and the service/repairs seem to be praised almost every day!

The manual is a 10.2Mb PDF digital download. You will be emailed a link to a secure download which will expire after 24 hours. Although normally instantaneous, please allow up to 24 hours for payment to be processed and to receive this link; and make sure you check your Junk Mail folder for the email link!

We do not currently offer the manual by post however if this is required it can be arranged so please ask. Once you have made payment, you will be entitled to any future updates of the manual for free and we would also recommend you become a member of the site forum and say hello! Current version of the manual is V3.3

Any questions please ask.
andrew or mick
(forum ref: andrew or logun-ator)

Logun S16 and EB XVI service manual – £11.50

By clicking the button below, I agree with the Terms & Conditions.

Payment can be made via PayPal or with a credit/debit card by clicking the “Don’t have a PayPal account?” link on the following page


The Logun S-16, S-16s & EVO Pump Action conversion guide.

S16 pump action conversion guideThis guide will take you through the steps of converting your Logun S-16 back to or as close as possible to its original factory design of a Pump Action Repeating PCP rifle.
Complete with detailed machinists drawings accompanied by high-res photographs and step by step instructions. With a little skill and patience you can inject that extra bit of fun back into this much loved rifle.
Comprised of some 53 Pages, over 130 full colour photographs, 22 high-res drawings and approx 6,400 words.

WARNING: You will use much more ammo!

Containing 15 chapters with An Introduction by: The Logun-ator

This is just a selection of the CONTENTS:

PART 1: Parts and services.
PART 2: Tools and materials.
PART 3: Pump Action Design and Implementation.
PART 6: Magazine Index cam modification.
PART 10: Slide “tube”.
PART 11: “Pump Action” Assembly photographs.
PART 13: Various useful drawings.

An excellent compliment to The Logun-ators “Haynes Manual” if you are planning on doing a reversion!

Delivered on DVD by recorded delivery for £12

* Price is delivered to UK address only
overseas buyers please contact logun-ator on the forum


S16 & XVI buddy bottle cap

s16 and XVI buddy bottle capBuddy bottle valve protector caps are now available to replace the ones that seem to go missing from rifles as they get sold on second hand!

The caps protect the delicate valve stem on the bottle from damage and should always be used when the bottle is not connected to the rifle – replacement bottle valves are becoming impossible to find these days and the complete bottles from EB are not easy or cheap to get hold of!

They also protect the valve from dust which could end up getting inside the rifle and so damage the internal seals.

The caps are made to be slightly larger in diameter than the originals which makes them slightly more stable on the bottle and feel more sturdy in the hand.

The below price includes delivery but please be aware that the caps are made to order so you may not receive it immediately. Having said that, they are usually sent within 48 hours of receiving the order.

Any questions please ask
trevor (forum ref: trev-1988)

Logun S16 mk2, S16s, S16 Evo, EB XVI bottle cap – £

Price TBA and online payment will be added once supply is finalised.

* Price is delivered to UK address only
overseas buyers please contact trev-1988 on the forum


Inlet valve dust cap

S16 & XVI inlet valve dust capCustom made dust caps to protect the inlet valve when your buddy bottle is removed. The caps are black plastic and threaded to fit perfectly into the rifle air inlet.

Any dust or debris entering the inlet valve could then end up being blown into the internals of the rifle when you next connect your bottle. This cap is therefore a really useful addition to your kit – simple but effective.

The below price includes delivery but please be aware that the caps are made to order so you may not receive it immediately. Having said that, they are usually sent within 48 hours of receiving the order.

Any questions please ask
trevor (forum ref: trev-1988)

Logun S16 mk2, S16s, S16 Evo, EB XVI bottle cap – £

Price TBA and online payment will be added once supply is finalised.

* Price is delivered to UK address only
overseas buyers please contact trev-1988 on the forum