Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.





Pages: [1]
Author Topic: Logun s16 TUNING
TIM WARD
Forum Newbie
Posts: 10
Permalink
Send Message
Post Logun s16 TUNING
on: December 27, 2017, 12:24
Quote

Have been tuning s16 now for the last two years any advise please don't hesitate to ask. Anything over 12fpe obviously requires FAC. Tuning strictly for low performance. Anything FAC must hold a FAC licence. It is possible to tune 45 plus FPE.

ajmac
Forum Newbie
Posts: 1
Permalink
Send Message
ajmac
Post Re: Logun s16 TUNING
on: January 12, 2018, 18:36
Quote

Am applying for a FAC for my S16 Mk2. How best would I go about getting it tuned up and what would be the most appropriate FPE level? Am looking to use it for rabbit control mainly with some target shooting.

TIM WARD
Forum Newbie
Posts: 10
Permalink
Send Message
Post Re: Logun s16 TUNING
on: January 22, 2018, 22:31
Quote

Drilling out the transfer port stronger hammer spring 500 cc bottle larger transfer tube I went to 3.2mm

TIM WARD
Forum Newbie
Posts: 10
Permalink
Send Message
Post Re: Logun s16 TUNING
on: January 22, 2018, 22:37
Quote

I fitted such a strong spring the auto magazine mechanism was removed to allow stronger compression.the mechanism wouldn't work after fitting stronger spring

TIM WARD
Forum Newbie
Posts: 10
Permalink
Send Message
Post Re: Logun s16 TUNING
on: January 22, 2018, 22:42
Quote

The stronger spring prevented full stroke of cooking mechanism but worth it.the tranfer tube is the biggest improvement originals only about 1.1mm restricting air .purchased stainless tube 3.2mm it's a lot of work but now

TIM WARD
Forum Newbie
Posts: 10
Permalink
Send Message
Post Re: Logun s16 TUNING
on: January 22, 2018, 22:57
Quote

Massive improvement.will message properly one evening as on mobile and can't write correctly.

Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.09 seconds.